etc/sysconfig/wpa_supplicant
setting /etc/sysconfig/network-scripts/ifcfg-eth1
restarting firewall
Starting firewall
Flushing all current rules and user defined chains
Clearing all current rules and user defined chains
Applying iptables firewall rules
Turning on IP forwarding
restarting network
restarting wpa_supplicant
Stopping wpa_supplicant: Shutting down loopback interface: [  OK  ]
Starting wpa_supplicant:                                   [  OK  ]
[  OK  ]
Disabling IPv4 packet forwarding:  net.ipv4.ip_forward = 0
[  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth1:
Determining IP information for eth1...starting wpa_cli: give it command reassociate
run wpa_cli with reassociate command
Selected interface 'eth1'
OK
starting wpa_cli. Wait for [OK] Then hit return and type: status
wpa_cli v0.4.8
Copyright (c) 2004-2005, Jouni Malinen <jkmaline@cc.hut.fi> and contributors

This program is free software. You can distribute it and/or modify it
under the terms of the GNU General Public License version 2.

Alternatively, this software may be distributed under the terms of the
BSD license. See README and COPYING for more details.


Selected interface 'eth1'

Interactive mode

> <2>Trying to associate with 00:0c:db:8b:84:40 (SSID='UOBWLAN' freq=0 MHz)
<2>Associated with 00:0c:db:8b:84:40
<2>CTRL-EVENT-EAP-STARTED EAP authentication started
<2>CTRL-EVENT-EAP-METHOD EAP method 25 (PEAP) selected
<2>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
<2>WPA: Key negotiation completed with 00:0c:db:8b:84:40 [PTK=TKIP GTK=WEP-40]
<2>CTRL-EVENT-CONNECTED - Connection to 00:0c:db:8b:84:40 completed (auth)
 done.
[  OK  ]

> status
bssid=00:0c:db:8b:84:40
ssid=UOBWLAN
pairwise_cipher=TKIP
group_cipher=WEP-40
key_mgmt=WPA/IEEE 802.1X/EAP
wpa_state=COMPLETED
ip_address=192.168.30.87
Supplicant PAE state=AUTHENTICATED
suppPortStatus=Authorized
EAP state=SUCCESS
selectedMethod=25 (EAP-PEAP)
EAP TLS cipher=RC4-MD5
EAP-PEAPv0 Phase2 method=MSCHAPV2
>